Cy16 Ask 315 MHz 433MHz RF Data Receiver Module

• Customization: Available
• Usage: Remote Control System
• Type: Wireless
• Model NO.: CY16
• Support Network: RF
• Information content: Data
• Certification: CE, RoHS
• Condition: New
• Frequency: 433.92/315MHz
• Sensitivity: -107dBm
• Voltage: 3.3~5.5V
• Current: 2.8~4.1mA
• Working Temperature: -20 ~ 70 Degree
• Modulation: Ask/Ook
• Data Rate: 2.4kbps
• Transport Package: Plastic Pallet with Individual Slot
• Specification: 43*11*5mm
• Trademark: CY
• Origin: China
• HS Code: 8517629900
• Production Capacity: 200000PCS/Year

Product Description

Description:
CY16 is an ASK/OOK receiver super-heterodyne module adopted highly integrated RF IC chips, which is designed specifically for unlicensed remote-control and wireless security receiver operating at 315/433.92Mhz in USA under FCC Part 15 regulation. The CY16 is base on a single-conversion, super-heterodyne receiver architecture and incorporates an entire Phase-Locked Loop (PLL) for precise local oscillator generation. It can be used in OOK/ HCS/ PWM modulation signal and demodulate to digital signal. CY16 have a high performance at a competitive cost and easily to design your product.

Features:

1. Low power consumption and low cost
2. High frequency stability (no adjust components) & coherence
3. Very low RF re-radiation at the antenna
4. Higher sensitivity: -107dBm
5. Operation temperature: -20ºC ~70ºC ( It can custom to  -40~85ºC upon requests)
6. Supply voltage: 3.3 ~ 5.5V
7. Low current: 2.8mA(5V)@315MHZ
8. Compatible with most AM (ASK/OOK) transmitters

Application

1. Smart home system
2. Remote controls
3. Remote fan and light control
4. Garage door and gate openers
5. Alarm and security system

Pin Description


 

Pin Name	Pin Definition
ANT	RF signal input pin, connect antenna outside(Note1)
GND	Connect to negative power supply
GND	Connect to negative power supply
VDD	Connect to positive power supply
VDD	Connect to positive power supply
DATA	Data output pin, connect to MCU or decoder's input pin
DATA	Data output pin, connect to MCU or decoder's input pin
GND	Connect to negative power supply

Note1: ANT pin is a 50 ohm antenna input. The length is about: 
23cm for 315MHz
17cm for 433.92MHz


Electrical Characteristics:
Condition: Ta=25ºC Vcc=5.0V Frequency=315MHz

Parameter	Specification			Unit	Condition
	Min.	Typ.	Max.
Frequency Range		315		MHz	Other freq. available
Receiver Sensitivity		-107		dBm	BER=10E-2
Data Rate	0.58	2.4	4.8	Kbps	Manchester code
Supply Voltage, VDD	3.3	5.0	5.5	V	DC
Current		2.8		mA	DC
Working Temperature	-20		70	ºC

Condition: Ta=25ºC Vcc=5.0V Frequency=433.92MHz

Parameter	Specification			Unit	Condition
	Min.	Typ.	Max.
Frequency Range		433.92		MHz	Other freq. available
Receiver Sensitivity		-107		dBm	BER=10E-2
Data Rate	0.58	2.4	4.8	Kbps	Manchester code
Supply Voltage, VDD	3.3	5.0	5.5	V	DC
Current		4.1		mA	DC
Working Temperature	-20		70	ºC

Mechanical Size: (Unit: MM)