Customization: | Available |
---|---|
Usage: | Remote Control System |
Type: | Wireless |
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Pin 2-7-11 | Ground | GND |
Pin 3 | Antenna | Antenna input, impedance 50ohm. |
Pin 10-12-15 | +Vs | Positive Voltage supply. |
Pin13 | RSSI Out - Test point | RSSI output proportional to the amplitude of the input signal. |
Pin 14 | Data output | Data output from the receiver. |
Parameter | Specification | Unit | Condition | ||
Min | Typ. | Max | |||
Carrier Frequency | 310 | 314.98 | 316 | MHz | IF=220kHz |
Supply Voltage | 2.7 | 5.0 | 5.5 | V | 5.0V at default |
Supply Current | 4.6 | 6.0 | 6.2 | mA | FSK |
4.7 | 6.0 | 6.2 | ASK | ||
Modulation Mode | ASK/FSK | ||||
RF sensitivity | -116 | dBm | 600bps(Manchester), dev=±40kHz | ||
Frequency Deviation | ±80 | kHz | |||
-3dB Bandwidth | 250 | kHz | |||
Data rate | 2.4 | 9.6 | Kbps | ||
Turn on time from sleep | 3 | ms | |||
"L" level input/output level | 0 | 0.2 | V | ||
"H" level input/output level | 2.0 | 5.5 | V | ||
Output voltage (L level) | 0.4 | V | IDATAL = 200μA | ||
Output leak current (H level) | 0 | 2 | μA | ||
Wave shaping output duty ratio | 45 | 50 | 55 | % | VIN (MIX) = 60dBmVEMFF or single tone |
Image Suppression Ratio | 35 | dB | |||
Operating Temperature Range | -40 | 85 | ºC |
Parameter | Specification | Unit | Condition | ||
Min | Typ. | Max | |||
Carrier Frequency | 430 | 433.92 | 435 | MHz | IF=220kHz |
Supply Voltage | 2.7 | 5.0 | 5.5 | V | 5.0V at default |
Supply Current | 4.6 | 6.0 | 6.2 | mA | FSK |
4.7 | 6.0 | 6.2 | ASK | ||
Modulation Mode | ASK/FSK | ||||
RF sensitivity | -116 | dBm | 600bps(Manchester), dev=±40kHz | ||
Frequency Deviation | ±80 | kHz | |||
-3dB Bandwidth | 250 | kHz | |||
Data rate | 2.4 | 9.6 | Kbps | ||
Turn on time from sleep | 3 | ms | |||
"L" level input/output level | 0 | 0.2 | V | ||
"H" level input/output level | 2.0 | 5.5 | V | ||
Output voltage (L level) | 0.4 | V | IDATAL = 200μA | ||
Output leak current (H level) | 0 | 2 | μA | ||
Wave shaping output duty ratio | 45 | 50 | 55 | % | VIN (MIX) = 60dBmVEMFF or single tone |
Image Suppression Ratio | 35 | dB | |||
Operating Temperature Range | -40 | 85 | ºC |