Cy01 Receiver + Cytd1 Long Range 433.92/315 MHz Transmitter Module Set

• Usage: Remote Control System
• Type: Wireless
• Support Network: RF
• Information content: Data
• Certification: CE, RoHS
• Condition: New
• Model NO.: CY01 + cytd1
• Transport Package: Plastic Pallet with Individual Slot
• Specification: 30*20*5mm
• Trademark: CY
• Origin: China
• HS Code: 8517629900
• Production Capacity: 200000PCS/Year

Product Description

CYTD1 transmitting module:

Features:

1. High output power, when using with CY11, it can reach 2000 meters in open area. 
2. Transmitting Power > 0.5W.
3. Operating Voltage: DC5V
4. Operating Current: About 120mA
5. Operating Frequency: 315MHz/433MHz (custom frequency is available)
6. Modulation: ASK/OOK
7. Using SAW frequency stabilization (+-75Khz), working frequency is stable.
8. There is no current consumption when there is no data transmitting. The current consumption with low emission is 120mA.
9. Shape Size: 30×20×6.5mm
10. Operating Temperature: -20ºC~+70ºC
11. Input Signal: TTL level

Application

1. RKE - remote keyless entry
2. Gate/Access Control
3. Wireless alarm
4. Remote Shutter/Curtain
5. Home automation system
6. Security and alarm systems
7. Wireless Industry Control

Pin Description


Pin-out as showed in figure 1 above

Pin Name	Pin Function
VDD	Positive Power Supply
DATA	Data connected to MCU
GND	Connect

Note 1: ANT pin is a 50 ohm antenna input. The length is about: 
23cm for 315MHz
17cm for 433.92MHz



Electrical Characteristics:
Condition: Working voltage: 5.0V, temperature = 25°C

Characteristics	Symbol	Condition	Value			Unit
			Min.	Typ.	Max.
Frequency	Fc		315		433.92	MHz
Modulation Mode			ASK
Output power		5V/50Ω		28		dBm
Data-rate				2.4	4.8	Kbps
Frequency Tolerate	Fc			±75		kHz
Current	IRC				120	mA
Working Voltage	VCC			5		V
Working Temperature	TC		-20		+70	ºC

Mechanical Size: (Unit: MM)


CAUTION
---Transmitting time: < 500ms (less than 500ms for each emission).

---Power off when CYTD1 is not transmitting. It is suggested to add an electric switch circuit to control this. It is suggested to allow 3 minutes for the module to cool down before next transmitting.

---It's a high output power transmitting module, it's normal that the heat is higher than standard modules.

CY01 Receiver Module:

Features:

1. Frequency: 315M/433.92MHz (custom frequency is available)
2. Low power consumption and low cost
3. Higher stability (no adjust components) & coherence
4. Very low RF re-radiation at the antenna;
5. Higher sensitivity: -107dBm
6. Operation temperature: -20ºC ~70ºC ( It can custom to -40ºC ~ 85ºC upon requests)
7. Supply voltage: 3.0 ~ 5.5V
8. Low current: 2.8mA(5V, 315MHz)
9. Be compatible with most (ASK/OOK) transmitters

Application

1. Smart home system
2. Remote controls
3. Remote fan and light control
4. Garage door and gate openers
5. Alarm and security system

Pin Description

Pin-out as showed in figure 1 above

Pin Name	Pin Definition
ANT	RF signal input pin, connect antenna outside(Note1)
GND	Connect to negative power supply
GND	Connect to negative power supply
VDD	Connect to positive power supply
VDD	Connect to positive power supply
NC	No connect
DATA	Data output pin, connect to MCU or decoder's input pin
GND	Connect to negative power supply

Note 1: ANT pin is a 50 ohm antenna input. The length is about: 
23cm for 315MHz
17cm for 433.92MHz



Electrical Characteristics:
Condition: Ta=25ºC Vcc=5.0V Frequency=315MHz

Parameter	Specification			Unit	Condition
	Min.	Typ.	Max.
Frequency Range		315		MHz	Other freq. available
Receiver Sensitivity		-107		dBm	BER=10E-2
Data Rate	0.58	2.4	4.8	Kbps	Manchester code
Supply Voltage, VDD	3.0	5.0	5.5	V	DC
Current	2.8			mA	DC
Operating Temperature	-20		70	ºC

Condition: Ta=25ºC Vcc=5.0V Frequency=433.92MHz

Parameter	Specification			Unit	Condition
	Min.	Typ.	Max.
Frequency Range		433.92		MHz	Other freq. available
Receiver Sensitivity		-107		dBm	BER=10E-2
Data Rate	0.58	2.4	4.8	KBaud	Manchester code
Supply Voltage, VDD	3.0	5.0	5.5	V	DC
Current	4.0			mA	DC
Operating Temperature	-20		70	ºC

Mechanical Size: (Unit: MM)