Cy42 Wireless Superhet 315MHz 433.92MHz RF Receiver Module

• Customization: Available
• Usage: Remote Control System
• Type: Wireless
• Model NO.: CY42
• Support Network: RF
• Information content: Data
• Certification: CE, RoHS
• Condition: New
• Frequency: 433.92/315MHz
• Sensitivity: -112dBm
• Voltage: 2.4~5.5V
• Current: 2.9~3.1mA
• Working Temperature: -40 ~ 80 Degree
• Modulation: Ask/Ook
• Data Rate: 9.6kbps
• Transport Package: Plastic Pallet with Individual Slot
• Specification: 43.2*11.3*5mm
• Trademark: CY
• Origin: China
• HS Code: 8517629900
• Production Capacity: 200000PCS/Year

Product Description

Description:
The CY42 is ASK/OOK Super Heterodyne receiver module, which can be used to receive un-decoded data from the range of CY's Transmitter modules. The module is very simple to operate and offer a low current consumption. Data can be transmitted directly into a microprocessor or decoding device. All receivers are compatible, producing CMOS/TTL Output, and only require connections to Power & Antenna.


Features:

1. Frequency: 315M/433.92MHz (custom frequency is available)
2. ASK/OOK Demodulation
3. Stable operating frequency
4. Low current consumption
5. Wide operating voltage: 2.4 ~ 5.5V DC
6. High sensitivity: -110dBm

Application

1. Wireless Security Systems
2. Garage Door Controller
3. Remote Gate Controls
4. Data Communications
5. Sensor Reporting

Pin Description

 

Pin Name	Pin Definition
ANT	RF signal input pin
GND	Connect to negative power supply
GND	Connect to negative power supply
VDD	Connect to positive power supply
VDD	Connect to positive power supply
EN	Optional output: 1.DATA output(default setting) 2.Battery saving mode(shut down): (Working mode in High level input) (Sleeping mode in Low level input)
DATA	Data output pin
GND	Connect to negative power supply

Note1:  ANT pin is a 50 ohm antenna input. The length is about:
23cm for 315MHz 
17cm for 433.92MHz



Electrical Characteristics:
Condition: Ta=25ºC  Vcc=5.0V  Freq.=315MHz

Parameter	Specification			Unit	Condition
	Min	Typ.	Max
Frequency range	314.90	315	315.10	MHz	Other freq. available
Receiver sensitivity		-110		dBm
Data rata		5	9.6	Kbps	Manchester code
Receiving start time			9	ms
Image Rejection		30		dB	304.3MHz
Receiving Bandwidth		200		kHz
Supply voltage, VDD	2.4	5.0	5.5	V
Current	2.6	2.7	2.8	mA
Voltage as decoding	0.5		5.5	V	RL=500K
Operation temperature	-40		+85	ºC

Condition: Ta=25ºC  Vcc=5.0V  Freq.=433.92MHz

Parameter	Specification			Unit	Condition
	Min	Typ.	Max
Frequency range	433.82	433.92	434.02	MHz	Other freq. available
Receiver sensitivity		-110		dBm
Data rata		5	9.6	Kbps	Manchester code
Receiving start time			9	ms
Image Rejection		30		dB	304.3MHz
Receiving Bandwidth		200		kHz
Supply voltage, VDD	2.4	5.0	5.5	V
Current	2.9	3.0	3.1	mA
Voltage as decoding	0.5		5.5	V	RL=500K
Operation temperature	-40		+85	ºC

Mechanical Size: (Unit: MM)

Note:
Because of the weak current of CY42 data output pin, I/O port on the single chip cannot connect pull-up or pull-down resistor and these resistors inside single chip must be set as disable state if it is needed to directly drive the single chip.