Cy01 Receiver Module + Cyt8 Long Range RF 433.92/ 315 Transmitter

• Customization: Available
• Usage: Remote Control System
• Type: Wireless
• Model NO.: CY01+CYT8
• Support Network: RF
• Information content: Data
• Certification: CE, RoHS
• Condition: New
• Transport Package: Plastic Pallet with Individual Slot
• Specification: 14*19*5mm
• Trademark: CY
• Origin: China
• HS Code: 8517629900
• Production Capacity: 200000PCS/Year

Product Description

CYT8 Transmitter Module:


Features:

1. Modulation: ASK/OOK;
2. Frequency: 315/433.92 MHz ;
3. Operating Voltage: 1.8V ~ 3.6V;
4. Output Power: up to [email protected];
5. Circuit Shape: PLL;
6. Current: 25mA/3.6V(average, 1:1 duty cycle);
7. Operating temperature: -20ºC~+70ºC( It can custom to -40ºC ~ 85ºC upon requests);
8. Frequency tolerance: ±50 KHz;
9. Bit rate: <3kbps;
10. The range can be up to 500m when matching with CY11.

Application

1. Wireless Security and Alarm Systems;
2. Home Automation;
3. Keyless Entry;
4. Wireless Dish Order Machine; 
5. Wireless Calling System;
6. Remote Control System of Gas Station;

Pin Description

Please note: CYT8 is come with standard 4 Vertical PINs as the picture showed in the right hand side. Please notify us if you would like horizontal PIN.

Pin	Name	Function
1	GND	Ground
2	DATA	Data connected to MCU
3	VDD	Positive Power Supply
4	ANT	Antenna In

Electrical Characteristics:
Condition : Ta=25ºC

Characteristics	Symbol	Condition	Value			Unit
			Min	Typ	Max
Frequency	Fc			315/433.92		MHz
Modulation Mode			ASK
Output power		3.6V/50Ω		17dBm		dBm
Data-rate				2.4		Kbps
Frequency Tolerate	Fc			±50		kHz
Current	IRC		18		26	mA
Working Voltage	VCC		1.8	3.0	3.6	V
Working Temperature	TC		-20		+70	ºC

Mechanical Size: (Unit: MM)

CAUSTION
---Transmitting time: <10s (less than 10 seconds for each emission).

---Power off when CYT8 is not transmitting. It is suggested to add an electric switch circuit to control this. It is suggested to allow 3 minutes for the module to cool down after transmitting.

---It's a high output power transmitting module, it's normal that the heat is higher than standard modules.


CY01 Receiver Module:

Features:

1. Frequency: 315M/433.92MHz (custom frequency is available)
2. Low power consumption and low cost
3. Higher stability (no adjust components) & coherence
4. Very low RF re-radiation at the antenna;
5. Higher sensitivity: -107dBm
6. Operation temperature: -20ºC ~70ºC ( It can custom to -40ºC ~ 85ºC upon requests)
7. Supply voltage: 3.0 ~ 5.5V
8. Low current: 2.8mA(5V, 315MHz)
9. Be compatible with most (ASK/OOK) transmitters

Application

1. Smart home system
2. Remote controls
3. Remote fan and light control
4. Garage door and gate openers
5. Alarm and security system

Pin Description

Pin-out as showed in figure 1 above

Pin Name	Pin Definition
ANT	RF signal input pin, connect antenna outside(Note1)
GND	Connect to negative power supply
GND	Connect to negative power supply
VDD	Connect to positive power supply
VDD	Connect to positive power supply
NC	No connect
DATA	Data output pin, connect to MCU or decoder's input pin
GND	Connect to negative power supply

Note 1: ANT pin is a 50 ohm antenna input. The length is about: 
23cm for 315MHz
17cm for 433.92MHz



Electrical Characteristics:
Condition: Ta=25ºC Vcc=5.0V Frequency=315MHz

Parameter	Specification			Unit	Condition
	Min.	Typ.	Max.
Frequency Range		315		MHz	Other freq. available
Receiver Sensitivity		-107		dBm	BER=10E-2
Data Rate	0.58	2.4	4.8	Kbps	Manchester code
Supply Voltage, VDD	3.0	5.0	5.5	V	DC
Current	2.8			mA	DC
Operating Temperature	-20		70	ºC

Condition: Ta=25ºC Vcc=5.0V Frequency=433.92MHz

Parameter	Specification			Unit	Condition
	Min.	Typ.	Max.
Frequency Range		433.92		MHz	Other freq. available
Receiver Sensitivity		-107		dBm	BER=10E-2
Data Rate	0.58	2.4	4.8	KBaud	Manchester code
Supply Voltage, VDD	3.0	5.0	5.5	V	DC
Current	4.0			mA	DC
Operating Temperature	-20		70	ºC

Mechanical Size: (Unit: MM)