Cy01+ Cyt1 315 433MHz Wireless RF Receiver Transmitter Module Set

• Usage: Remote Control System
• Type: Wireless
• Support Network: RF
• Information content: Data
• Certification: CE, RoHS
• Condition: New
• Model NO.: CY01+ Cyt1
• Transport Package: Plastic Pallet with Individual Slot
• Specification: 11.5*16*5mm
• Trademark: CY
• Origin: China
• HS Code: 8517629900
• Production Capacity: 200000PCS/Year

Product Description

CYT1 transmitter module:

Features:

1. The range can be 500m when matching with CY11
2. Operation voltage: VCC= 2.6 to 12V;
3. Frequency: 315MHz/433.92MHz(custom frequency is available);
4. High output power: 12dBm;
5. Frequency tolerance: ±75 KHz;
6. Current: 12mA;
7. Operating temperature: -20ºC~+70ºC
8. Bit rate: <1.2kbps;

Application

1. Remote gate controls
2. Remote keyless entry
3. Car alarm systems
4. Wireless security systems
5. Automation systems

Pin Description

Pin-out as showed in figure 1 above

Pin Name	Pin Definition
ANT	Antenna Out
GND	Connect to negative power supply
DATA	Data connected to MCU
VDD	Connect to positive power supply

Note 1: ANT pin is a 50 ohm antenna input. The length is about: 
23cm for 315MHz
17cm for 433.92MHz


Electrical Characteristics:

Condition: Ta=25ºC Vcc=5.0V

Characteristics	Symbol	Condition	Value			Unit
			Min.	Typ.	Max.
Frequency	Fc		315		433.92	MHz
Modulation Mode			ASK
Output power		5V/50Ω		12		dBm
Data-rate				1.2		Kbps
Frequency Tolerate	Fc			±75		KHz
Current	IRC				12	mA
Working Voltage	VCC		2.6		12	V
Working Temperature	TC		-20		+70	ºC

Mechanical Size: (Unit: MM)


CY01 Receiver Module:

Features:

1. Frequency: 315M/433.92MHz (custom frequency is available)
2. Low power consumption and low cost
3. Higher stability (no adjust components) & coherence
4. Very low RF re-radiation at the antenna;
5. Higher sensitivity: -107dBm
6. Operation temperature: -20ºC ~70ºC ( It can custom to -40ºC ~ 85ºC upon requests)
7. Supply voltage: 3.0 ~ 5.5V
8. Low current: 2.8mA(5V, 315MHz)
9. Be compatible with most (ASK/OOK) transmitters

Application

1. Smart home system
2. Remote controls
3. Remote fan and light control
4. Garage door and gate openers
5. Alarm and security system

Pin Description

Pin-out as showed in figure 1 above

Pin Name	Pin Definition
ANT	RF signal input pin, connect antenna outside(Note1)
GND	Connect to negative power supply
GND	Connect to negative power supply
VDD	Connect to positive power supply
VDD	Connect to positive power supply
NC	No connect
DATA	Data output pin, connect to MCU or decoder's input pin
GND	Connect to negative power supply

Note 1: ANT pin is a 50 ohm antenna input. The length is about: 
23cm for 315MHz
17cm for 433.92MHz



Electrical Characteristics:
Condition: Ta=25ºC Vcc=5.0V Frequency=315MHz

Parameter	Specification			Unit	Condition
	Min.	Typ.	Max.
Frequency Range		315		MHz	Other freq. available
Receiver Sensitivity		-107		dBm	BER=10E-2
Data Rate	0.58	2.4	4.8	Kbps	Manchester code
Supply Voltage, VDD	3.0	5.0	5.5	V	DC
Current	2.8			mA	DC
Operating Temperature	-20		70	ºC

Condition: Ta=25ºC Vcc=5.0V Frequency=433.92MHz

Parameter	Specification			Unit	Condition
	Min.	Typ.	Max.
Frequency Range		433.92		MHz	Other freq. available
Receiver Sensitivity		-107		dBm	BER=10E-2
Data Rate	0.58	2.4	4.8	KBaud	Manchester code
Supply Voltage, VDD	3.0	5.0	5.5	V	DC
Current	4.0			mA	DC
Operating Temperature	-20		70	ºC

Mechanical Size: (Unit: MM)