Cy03 Ask 315 433 MHz 433.92MHz RF Wireless Receiver Module

• Usage: Remote Control System
• Type: Wireless
• Support Network: RF
• Information content: Data
• Certification: CE, RoHS
• Condition: New
• Model NO.: CY03
• Frequency: 433.92/315MHz
• Sensitivity: -107dBm
• Voltage: 3.0~5.5V
• Current: 2.7~4.1mA
• Working Temperature: -20 ~ 70 Degree
• Modulation: Ask/Ook
• Data Rate: 1.2kbps
• Transport Package: Plastic Pallet with Individual Slot
• Specification: 43*10.5*5mm
• Trademark: CY
• Origin: China
• HS Code: 8517629900
• Production Capacity: 200000PCS/Year

Product Description

Description:
CY03 is an ASK/OOK receiver super-heterodyne module, which is designed specifically for unlicensed remote-control and wireless security receiver operating at 315/433.92MHz under FCC Part 15 regulation or pass ETSI certification. The CY03 is based on a single-conversion, super-heterodyne receiver architecture and incorporates an entire Phase-Locked Loop (PLL) for precise local oscillator generation. It can be used in OOK/HCS/PWM modulation signal and demodulate to digital signal. CY03 is a high performance module at a competitive cost and easily to design for your product.

The CY03 module can be also a RoHS compliance product.
 

Features:

1. Frequency: 315M/433.92 MHz (custom frequency is available)
2. Low cost ASK/OOK radio superhet receiver
3. High frequency stability (no adjust components) & coherence
4. Very low RF re-radiation at the antenna
5. Operation temperature: -20ºC ~ 70ºC (It can custom to -40ºC ~ 85ºC upon requests)
6. Supply voltage: 3.0 ~ 5.5V
7. Available frequency: 315/433.92 MHz (other Frequency customer selectable)
8. Compatible with most (ASK/OOK) transmitters

Application

1. Smart home system
2. Remote controls
3. Remote fan and light control
4. Garage door and gate openers
5. Alarm and security system

Pin Description

Pin-out as showed in figure 1 above

Pin Name	Pin Definition
ANT	RF signal input pin, connect antenna outside(Note1)
GND	Connect to negative power supply
GND	Connect to negative power supply
VDD	Connect to positive power supply
VDD	Connect to positive power supply
NC	No connect
DATA	Data output pin, connect to MCU or decoder's input pin
GND	Connect to negative power supply

Note 1: ANT pin is a 50 ohm antenna input. The length is about: 
23cm for 315MHz
17cm for 433.92MHz


ELECTRICAL CHARACTERISTICS:
Condition: Ta=25ºC Vcc=5.0V Frequency=315MHz

Parameter	Specification			Unit	Condition
	Min.	Typ.	Max.
Frequency Range		315		MHz
Receiver Sensitivity		-107		dBm
Data Rate	0.58	1.2	4.8	Kbps
Supply Voltage, VDD	3.0		5.5	V	DC
Current	2.7		4.1	mA
Operating Temperature	-20		70	ºC

Condition: Ta=25ºC Vcc=5.0V Frequency=433.92MHz

Parameter	Specification			Unit	Condition
	Min.	Typ.	Max.
Frequency Range		433.92		MHz
Receiver Sensitivity		-107		dBm
Data Rate	0.58	1.2	4.8	Kbps
Supply Voltage, VDD	3.0		5.5	V	DC
Current	2.7		4.1	mA
Operating Temperature	-20		70	ºC

MECHANICAL SIZE: (UNIT: mm)